•

A complete solar and wind power system that combines whole-home energy storage with dual renewable charging sources for flexible backup power.

Overview

The MyGrid 10K Gen 2 Solar + Wind Power Bundle combines the MyGrid 10K Gen 2, MyGrid Solar Battery, 440W rigid bifacial solar panel, and 350W wind turbine. It is designed for whole-home backup, off-grid applications, and renewable energy storage with solar and wind charging options.

Benefits

  • Reduces reliance on grid electricity by storing renewable or off-peak energy for later use.
  • Provides whole-home backup power with 10,000W of continuous output and 10,496Wh of battery capacity.
  • Provides two renewable charging sources through solar panels and a 350W wind turbine.
  • Supports energy expansion by combining two units and adding additional battery and solar capacity.
  • Provides flexible charging through solar, wind, AC, and external fuel generator inputs.
  • Supports compatible rooftop solar operation during grid outages through AC coupling and Rapid Shutdown support.
  • Reduces downtime with charging capability of up to 80% in approximately 2 hours under supported conditions.
  • Supports flexible deployment with a plug-and-play design for permanent or temporary applications.

Features

  • 10,000W continuous output provides high-capacity power for whole-home applications.
  • 20,000W expandable continuous output allows two units to be combined for increased system capacity.
  • 10,496Wh LiFePO4 battery provides integrated energy storage.
  • 73.4kWh expandable battery capacity supports up to seven batteries.
  • 12,000W solar charging supports high-capacity solar integration through dual MPPT charging.
  • 440W rigid bifacial solar panel provides solar generation using N-Type TOPCon cells with 22.53% module efficiency at STC.
  • 350W wind turbine provides an additional renewable charging source.
  • 350W rated wind power at 27 MPH provides the specified wind generation capacity.
  • AC coupling and Rapid Shutdown support allow compatible rooftop solar systems to continue operating during grid outages.
  • Flexible voltage support accommodates 120V, 120/240V, and 120/208V charging and discharging configurations.
  • Multiple charging sources support solar, wind, AC, and external fuel generator inputs.
  • Automatic switching under 20ms enables rapid transition between power sources.
  • Pure sine wave output provides the specified AC power waveform.
  • Integrated Battery Management System (BMS) monitors and manages battery operation.
  • UL 1741-certified inverter and UL 1973-certified battery provide documented safety certifications.

Specifications

MyGrid 10K Gen 2

  • Continuous Output Power: 10,000W
  • Expandable Continuous Peak Power: 20,000W
  • Output Peak Power: 20,000W
  • Expandable Peak Power: 40,000W
  • Output Voltage: 120V/240V split phase or 120V/208V 2 of 3 phases
  • Output Frequency: 60Hz
  • Output Power Form: Pure sine wave
  • Auto Switching: <20ms
  • 120Vac Charger: 1,000W
  • 208Vac or 240Vac Charger: 4,500W
  • Wind Charger: 350W
  • Solar Charger: 12,000W, 120Vdc–550Vdc
  • Solar Charge Mode: 2 × MPPT
  • Generator Dimensions: 21.8 × 8.5 × 38.5 in. (555.4 × 216 × 980 mm), not counting mounting bar
  • Generator Weight: 152 lbs (69 kg)

MyGrid Solar Battery

  • Battery Capacity: 51.2V 205Ah (10,496Wh)
  • Expandable Battery Capacity: 73.4kWh (7 batteries)
  • Battery Chemistry: Lithium Iron Phosphate (LiFePO4)
  • Battery Cycle Life: >6,000 cycles
  • Self-Discharge: Recommended recharging every 6 months
  • Battery Dimensions: 21.8 × 8.5 × 23.4 in. (555.4 × 216 × 596 mm), not counting mounting bar
  • Battery Weight: 213 lbs (96.6 kg)
  • Battery Charging Temperature: 32–113°F (0–45°C)
  • Battery Discharging Temperature: 14–113°F (-10–45°C)
  • Battery Certification: ANSI/CAN/UL 1973

440W Rigid Bifacial Solar Panel

  • Maximum Power (Pmax): 440W
  • Maximum Power Voltage (Vmp): 32.30V
  • Maximum Power Current (Imp): 13.63A
  • Open-Circuit Voltage (Voc): 38.80V
  • Short-Circuit Current (Isc): 14.39A
  • Module Efficiency at STC: 22.53%
  • Dimensions: 1722 × 1134 × 30 mm (67.8 × 44.6 × 1.2 in.)
  • Cell Type: N-Type TOPCon, 182 × 91 mm
  • Number of Half-Cells: 108 (6 × 18)
  • Frame: Anodized aluminum alloy, all black
  • Panel Weight: 24.5 kg (54 lbs)
  • Glass: 2.0 mm + 2.0 mm, high-transmission, AR-coated, heat-strengthened glass
  • Operating Temperature: -40°C to +85°C (-40°F to +185°F)
  • Junction Box: IP68-rated, MC4 connector compatible
  • Output Cables: 4 mm², 350 mm, with connectors

350W Wind Turbine

  • Rated Power: 350W @ 27 MPH
  • Maximum Wind Speed: 110 MPH
  • Wind Turbine Cable Connectors: Weatherproof M19 3P connectors
  • Wind Input Connectors: Anderson connectors
  • Yaw: Fits 1.5-inch Schedule 40 pipes or towers
  • Wind Turbine Blades: Fiberglass nylon composite
  • Wind Turbine Body: Cast aluminum alloy with powder coating
  • Wind Turbine Cable: 12 AWG pure copper cable
  • Rotor Diameter: 63 in. (1.6 m)
  • Wind Turbine Weight: 37 lbs (17 kg)
  • Certifications: CE, RoHS
  • Optimal Operating Temperature: 68–86°F (20–30°C)
  • Storage Temperature: 14–113°F (-10–45°C)
  • Warranty: 5-Year Limited Warranty
  • Inverter Certification: ANSI/CAN/UL 1741

Documents

MyGrid 10k Specification Sheet
MyGrid 10K Generator and Battery User Manual
MyGrid 10K Inverter Certificate of Compliance - ANSI/CAN/UL 1741
MyGrid 10K Battery cETLus Certificate -ANSI/CAN/UL 1973
MyGrid 10K Solar Panel Connection Guide
350W Wind Turbine User Guide

Nature's Generator

Nature's Generator - MyGrid 10K Gen 2 Solar and Wind Generator for Home

SKU NGMGTNAUWA
$8,999.98

A complete solar and wind power system that combines whole-home energy storage with dual renewable charging sources for flexible backup power.

Overview

The MyGrid 10K Gen 2 Solar + Wind Power Bundle combines the MyGrid 10K Gen 2, MyGrid Solar Battery, 440W rigid bifacial solar panel, and 350W wind turbine. It is designed for whole-home backup, off-grid applications, and renewable energy storage with solar and wind charging options.

Benefits

  • Reduces reliance on grid electricity by storing renewable or off-peak energy for later use.
  • Provides whole-home backup power with 10,000W of continuous output and 10,496Wh of battery capacity.
  • Provides two renewable charging sources through solar panels and a 350W wind turbine.
  • Supports energy expansion by combining two units and adding additional battery and solar capacity.
  • Provides flexible charging through solar, wind, AC, and external fuel generator inputs.
  • Supports compatible rooftop solar operation during grid outages through AC coupling and Rapid Shutdown support.
  • Reduces downtime with charging capability of up to 80% in approximately 2 hours under supported conditions.
  • Supports flexible deployment with a plug-and-play design for permanent or temporary applications.

Features

  • 10,000W continuous output provides high-capacity power for whole-home applications.
  • 20,000W expandable continuous output allows two units to be combined for increased system capacity.
  • 10,496Wh LiFePO4 battery provides integrated energy storage.
  • 73.4kWh expandable battery capacity supports up to seven batteries.
  • 12,000W solar charging supports high-capacity solar integration through dual MPPT charging.
  • 440W rigid bifacial solar panel provides solar generation using N-Type TOPCon cells with 22.53% module efficiency at STC.
  • 350W wind turbine provides an additional renewable charging source.
  • 350W rated wind power at 27 MPH provides the specified wind generation capacity.
  • AC coupling and Rapid Shutdown support allow compatible rooftop solar systems to continue operating during grid outages.
  • Flexible voltage support accommodates 120V, 120/240V, and 120/208V charging and discharging configurations.
  • Multiple charging sources support solar, wind, AC, and external fuel generator inputs.
  • Automatic switching under 20ms enables rapid transition between power sources.
  • Pure sine wave output provides the specified AC power waveform.
  • Integrated Battery Management System (BMS) monitors and manages battery operation.
  • UL 1741-certified inverter and UL 1973-certified battery provide documented safety certifications.

Specifications

MyGrid 10K Gen 2

  • Continuous Output Power: 10,000W
  • Expandable Continuous Peak Power: 20,000W
  • Output Peak Power: 20,000W
  • Expandable Peak Power: 40,000W
  • Output Voltage: 120V/240V split phase or 120V/208V 2 of 3 phases
  • Output Frequency: 60Hz
  • Output Power Form: Pure sine wave
  • Auto Switching: <20ms
  • 120Vac Charger: 1,000W
  • 208Vac or 240Vac Charger: 4,500W
  • Wind Charger: 350W
  • Solar Charger: 12,000W, 120Vdc–550Vdc
  • Solar Charge Mode: 2 × MPPT
  • Generator Dimensions: 21.8 × 8.5 × 38.5 in. (555.4 × 216 × 980 mm), not counting mounting bar
  • Generator Weight: 152 lbs (69 kg)

MyGrid Solar Battery

  • Battery Capacity: 51.2V 205Ah (10,496Wh)
  • Expandable Battery Capacity: 73.4kWh (7 batteries)
  • Battery Chemistry: Lithium Iron Phosphate (LiFePO4)
  • Battery Cycle Life: >6,000 cycles
  • Self-Discharge: Recommended recharging every 6 months
  • Battery Dimensions: 21.8 × 8.5 × 23.4 in. (555.4 × 216 × 596 mm), not counting mounting bar
  • Battery Weight: 213 lbs (96.6 kg)
  • Battery Charging Temperature: 32–113°F (0–45°C)
  • Battery Discharging Temperature: 14–113°F (-10–45°C)
  • Battery Certification: ANSI/CAN/UL 1973

440W Rigid Bifacial Solar Panel

  • Maximum Power (Pmax): 440W
  • Maximum Power Voltage (Vmp): 32.30V
  • Maximum Power Current (Imp): 13.63A
  • Open-Circuit Voltage (Voc): 38.80V
  • Short-Circuit Current (Isc): 14.39A
  • Module Efficiency at STC: 22.53%
  • Dimensions: 1722 × 1134 × 30 mm (67.8 × 44.6 × 1.2 in.)
  • Cell Type: N-Type TOPCon, 182 × 91 mm
  • Number of Half-Cells: 108 (6 × 18)
  • Frame: Anodized aluminum alloy, all black
  • Panel Weight: 24.5 kg (54 lbs)
  • Glass: 2.0 mm + 2.0 mm, high-transmission, AR-coated, heat-strengthened glass
  • Operating Temperature: -40°C to +85°C (-40°F to +185°F)
  • Junction Box: IP68-rated, MC4 connector compatible
  • Output Cables: 4 mm², 350 mm, with connectors

350W Wind Turbine

  • Rated Power: 350W @ 27 MPH
  • Maximum Wind Speed: 110 MPH
  • Wind Turbine Cable Connectors: Weatherproof M19 3P connectors
  • Wind Input Connectors: Anderson connectors
  • Yaw: Fits 1.5-inch Schedule 40 pipes or towers
  • Wind Turbine Blades: Fiberglass nylon composite
  • Wind Turbine Body: Cast aluminum alloy with powder coating
  • Wind Turbine Cable: 12 AWG pure copper cable
  • Rotor Diameter: 63 in. (1.6 m)
  • Wind Turbine Weight: 37 lbs (17 kg)
  • Certifications: CE, RoHS
  • Optimal Operating Temperature: 68–86°F (20–30°C)
  • Storage Temperature: 14–113°F (-10–45°C)
  • Warranty: 5-Year Limited Warranty
  • Inverter Certification: ANSI/CAN/UL 1741

Documents

MyGrid 10k Specification Sheet
MyGrid 10K Generator and Battery User Manual
MyGrid 10K Inverter Certificate of Compliance - ANSI/CAN/UL 1741
MyGrid 10K Battery cETLus Certificate -ANSI/CAN/UL 1973
MyGrid 10K Solar Panel Connection Guide
350W Wind Turbine User Guide
$8,999.98
Options:

Estimated shipping time

You can typically expect your items to arrive within 4–7 business days, depending on your location and product availability.

What is your Return Policy?

At Direct Homestead Supply, we want every customer to shop with confidence. If something doesn’t go as planned, we’ve made returns and refunds simple and fair. Here’s how it works:

1. Return Window

You can request a return within 30 days of receiving your order. Unfortunately, we’re unable to accept returns after that time frame.

2. Who Pays for Return Shipping?

  • If your item arrives damaged, defective, or incorrect, we’ll cover the return shipping cost.
  • If you’re returning an item because you changed your mind, you’ll be responsible for return shipping fees.

3. Damaged or Defective Items

Received something broken or not working properly? Contact us within 30 days. We’ll provide a prepaid return label and once the item is returned and inspected, we’ll issue either a full refund or a replacement—including any original shipping costs.

4. Changed Your Mind?

If you no longer want the item, you can return it within 30 days—as long as it's unused, in its original packaging, and in resellable condition. You’ll need to handle the return shipping, and once we receive and inspect it, we’ll refund the product cost (excluding shipping).

5. Refund Processing

Once we receive and approve your return, we’ll send a confirmation email and issue a refund to your original payment method within 7 business days. Please allow additional time for banks or credit card companies to process and reflect the refund.

If it’s been over 10 business days since your refund was approved and you still don’t see it, contact us at support@directhomesteadsupply.com and we’ll look into it immediately.

6. Restocking Fees

In some cases, a restocking fee may apply depending on the item and return reason. If applicable, we’ll clearly communicate this during your return request process.

A complete solar and wind power system that combines whole-home energy storage with dual renewable charging sources for flexible backup power.

Overview

The MyGrid 10K Gen 2 Solar + Wind Power Bundle combines the MyGrid 10K Gen 2, MyGrid Solar Battery, 440W rigid bifacial solar panel, and 350W wind turbine. It is designed for whole-home backup, off-grid applications, and renewable energy storage with solar and wind charging options.

Benefits

  • Reduces reliance on grid electricity by storing renewable or off-peak energy for later use.
  • Provides whole-home backup power with 10,000W of continuous output and 10,496Wh of battery capacity.
  • Provides two renewable charging sources through solar panels and a 350W wind turbine.
  • Supports energy expansion by combining two units and adding additional battery and solar capacity.
  • Provides flexible charging through solar, wind, AC, and external fuel generator inputs.
  • Supports compatible rooftop solar operation during grid outages through AC coupling and Rapid Shutdown support.
  • Reduces downtime with charging capability of up to 80% in approximately 2 hours under supported conditions.
  • Supports flexible deployment with a plug-and-play design for permanent or temporary applications.

Features

  • 10,000W continuous output provides high-capacity power for whole-home applications.
  • 20,000W expandable continuous output allows two units to be combined for increased system capacity.
  • 10,496Wh LiFePO4 battery provides integrated energy storage.
  • 73.4kWh expandable battery capacity supports up to seven batteries.
  • 12,000W solar charging supports high-capacity solar integration through dual MPPT charging.
  • 440W rigid bifacial solar panel provides solar generation using N-Type TOPCon cells with 22.53% module efficiency at STC.
  • 350W wind turbine provides an additional renewable charging source.
  • 350W rated wind power at 27 MPH provides the specified wind generation capacity.
  • AC coupling and Rapid Shutdown support allow compatible rooftop solar systems to continue operating during grid outages.
  • Flexible voltage support accommodates 120V, 120/240V, and 120/208V charging and discharging configurations.
  • Multiple charging sources support solar, wind, AC, and external fuel generator inputs.
  • Automatic switching under 20ms enables rapid transition between power sources.
  • Pure sine wave output provides the specified AC power waveform.
  • Integrated Battery Management System (BMS) monitors and manages battery operation.
  • UL 1741-certified inverter and UL 1973-certified battery provide documented safety certifications.

Specifications

MyGrid 10K Gen 2

  • Continuous Output Power: 10,000W
  • Expandable Continuous Peak Power: 20,000W
  • Output Peak Power: 20,000W
  • Expandable Peak Power: 40,000W
  • Output Voltage: 120V/240V split phase or 120V/208V 2 of 3 phases
  • Output Frequency: 60Hz
  • Output Power Form: Pure sine wave
  • Auto Switching: <20ms
  • 120Vac Charger: 1,000W
  • 208Vac or 240Vac Charger: 4,500W
  • Wind Charger: 350W
  • Solar Charger: 12,000W, 120Vdc–550Vdc
  • Solar Charge Mode: 2 × MPPT
  • Generator Dimensions: 21.8 × 8.5 × 38.5 in. (555.4 × 216 × 980 mm), not counting mounting bar
  • Generator Weight: 152 lbs (69 kg)

MyGrid Solar Battery

  • Battery Capacity: 51.2V 205Ah (10,496Wh)
  • Expandable Battery Capacity: 73.4kWh (7 batteries)
  • Battery Chemistry: Lithium Iron Phosphate (LiFePO4)
  • Battery Cycle Life: >6,000 cycles
  • Self-Discharge: Recommended recharging every 6 months
  • Battery Dimensions: 21.8 × 8.5 × 23.4 in. (555.4 × 216 × 596 mm), not counting mounting bar
  • Battery Weight: 213 lbs (96.6 kg)
  • Battery Charging Temperature: 32–113°F (0–45°C)
  • Battery Discharging Temperature: 14–113°F (-10–45°C)
  • Battery Certification: ANSI/CAN/UL 1973

440W Rigid Bifacial Solar Panel

  • Maximum Power (Pmax): 440W
  • Maximum Power Voltage (Vmp): 32.30V
  • Maximum Power Current (Imp): 13.63A
  • Open-Circuit Voltage (Voc): 38.80V
  • Short-Circuit Current (Isc): 14.39A
  • Module Efficiency at STC: 22.53%
  • Dimensions: 1722 × 1134 × 30 mm (67.8 × 44.6 × 1.2 in.)
  • Cell Type: N-Type TOPCon, 182 × 91 mm
  • Number of Half-Cells: 108 (6 × 18)
  • Frame: Anodized aluminum alloy, all black
  • Panel Weight: 24.5 kg (54 lbs)
  • Glass: 2.0 mm + 2.0 mm, high-transmission, AR-coated, heat-strengthened glass
  • Operating Temperature: -40°C to +85°C (-40°F to +185°F)
  • Junction Box: IP68-rated, MC4 connector compatible
  • Output Cables: 4 mm², 350 mm, with connectors

350W Wind Turbine

  • Rated Power: 350W @ 27 MPH
  • Maximum Wind Speed: 110 MPH
  • Wind Turbine Cable Connectors: Weatherproof M19 3P connectors
  • Wind Input Connectors: Anderson connectors
  • Yaw: Fits 1.5-inch Schedule 40 pipes or towers
  • Wind Turbine Blades: Fiberglass nylon composite
  • Wind Turbine Body: Cast aluminum alloy with powder coating
  • Wind Turbine Cable: 12 AWG pure copper cable
  • Rotor Diameter: 63 in. (1.6 m)
  • Wind Turbine Weight: 37 lbs (17 kg)
  • Certifications: CE, RoHS
  • Optimal Operating Temperature: 68–86°F (20–30°C)
  • Storage Temperature: 14–113°F (-10–45°C)
  • Warranty: 5-Year Limited Warranty
  • Inverter Certification: ANSI/CAN/UL 1741

Documents

MyGrid 10k Specification Sheet
MyGrid 10K Generator and Battery User Manual
MyGrid 10K Inverter Certificate of Compliance - ANSI/CAN/UL 1741
MyGrid 10K Battery cETLus Certificate -ANSI/CAN/UL 1973
MyGrid 10K Solar Panel Connection Guide
350W Wind Turbine User Guide

  • FREE SHIPPING IN USA

    Free shipping with every order

  • SATISFACTION GUARANTEED

    If your order arrives defective or fails

    to function properly, you will receive a full 100% refund!

  • PREMIUM CUSTOMER SUPPORT

    Connect with us through live chat,

    email, or phone, and we will address any questions you may have!

  • SECURE ENCRYPTED PAYMENTS

    We utilize advanced encryption

    to ensure there is never an issue with your privacy.