-
files/NGMGTN.webp
-
files/NGMGTNB2_452a6a41-6cd7-4c75-b511-e447fc92530a.webp
-
files/MyGrid_10k_with_Dimensions.webp
-
files/MyGrid_10K_Front_Facing_Right.webp
-
files/MyGrid_10K_Gen_2_Right_Side.webp
-
files/MyGrid_10K_Gen_2_Back_Side.webp
-
files/NGMGTNB_cd5626e0-436a-4f11-839d-9863eafb33ca.webp
A 10,000W whole-home power system that stores energy for reliable backup power, flexible charging, and greater energy independence.
Overview
The MyGrid 10K Gen 2 is a whole-home energy storage system combining a 10,000W inverter with a 10,496Wh LiFePO4 battery. It supports grid, solar, wind, and generator charging while providing expandable power and battery capacity for backup, off-grid, and energy storage applications.
Benefits
- Reduces reliance on high-rate grid electricity by storing energy for use during higher-cost periods.
- Provides dependable backup power for outages and off-grid applications.
- Supports long-term energy storage with a LiFePO4 battery rated for more than 6,000 cycles.
- Allows the system to grow with energy needs through expandable power, battery, and solar capacity.
- Provides flexible energy sourcing through solar, wind, AC, and external generator charging.
- Minimizes downtime with charging capability of up to 80% in approximately 2 hours under supported charging conditions.
- Supports easier deployment with a plug-and-play design suitable for permanent or temporary installations.
Features
- 10,000W continuous output provides high-capacity power for whole-home applications.
- 20,000W expandable continuous output allows two units to be combined for increased power capacity.
- 10,496Wh LiFePO4 battery provides integrated energy storage.
- 73.4kWh expandable battery capacity supports up to seven batteries.
- 12,000W solar charging supports high-capacity solar integration through dual MPPT solar charging.
- 350W wind charging provides an additional renewable charging option.
- AC coupling and Rapid Shutdown support allow compatible rooftop solar systems to continue operating during grid outages while supporting solar safety requirements.
- Flexible voltage charging supports 120V, 120/240V, and 120/208V charging configurations.
- Automatic switching under 20ms helps transition between power sources quickly.
- Pure sine wave output provides a clean AC power waveform.
- Integrated Battery Management System (BMS) monitors and manages battery status for system operation.
- LED display provides accessible system and battery status information.
- Multiple output and input ports support a range of power connections and charging sources.
- UL 1741 and UL 1973 certifications provide documented safety certifications for the inverter and battery.
Specifications
- Continuous Output Power: 10,000W
- Expandable Continuous Peak Power: 20,000W
- Output Peak Power: 20,000W
- Expandable Peak Power: 40,000W
- Output Voltage: 120V/240V split phase or 120V/208V 2 of 3 phases
- Output Frequency: 60Hz
- Output Power Form: Pure sine wave
- Auto Switching: <20ms
- Battery Capacity: 51.2V 205Ah (10,496Wh)
- Expandable Battery Capacity: 73.4kWh (7 batteries)
- Battery Chemistry: Lithium Iron Phosphate (LiFePO4)
- Battery Cycle Life: >6,000 cycles
- Self-Discharge: Recommended recharging every 6 months
- 120Vac Charger: 1,000W
- 208Vac or 240Vac Charger: 4,500W
- Wind Charger: 350W
- Solar Charger: 12,000W, 120Vdc–550Vdc
- Solar Charge Mode: 2 × MPPT
- Output Ports: 4 × NEMA 5-20R, 1 × NEMA TT-30R, 1 × NEMA L14-30R, 1 × NEMA 14-50R, 1 × Expansion Port
- Input Ports: 2 × Solar Input, 1 × Wind Input, 1 × 120Vac Input, 1 × 208Vac or 240Vac Input, 1 × Alternate 208Vac or 240Vac Input
- Optimal Operating Temperature: 68–86°F (20–30°C)
- Storage Temperature: 14–113°F (-10–45°C)
- Battery Charging Temperature: 32–113°F (0–45°C)
- Battery Discharging Temperature: 14–113°F (-10–45°C)
- Warranty: 5-Year Limited Warranty
- Inverter Certification: ANSI/CAN/UL 1741
- Battery Certification: ANSI/CAN/UL 1973
- Generator Dimensions: 21.8 x 8.5 x 38.5 in. (555.4 x 216 x 980 mm), excluding mounting bar
- Generator Weight: 152 lbs (69 kg)
- Battery Dimensions: 21.8 x 8.5 x 23.4 in. (555.4 x 216 x 596 mm), excluding mounting bar
- Battery Weight: 213 lbs (96.6 kg)
Documents
MyGrid 10k Specification Sheet
MyGrid 10K Generator and Battery User Manual
MyGrid 10K Inverter Certificate of Compliance ANSI/CAN/UL 1741
MyGrid 10K Battery cETLus Certificate ANSI/CAN/UL 1973
MyGrid 10K Solar Panel Connection Guide
- Regular price
- $5,999.99
A 10,000W whole-home power system that stores energy for reliable backup power, flexible charging, and greater energy independence.
Overview
The MyGrid 10K Gen 2 is a whole-home energy storage system combining a 10,000W inverter with a 10,496Wh LiFePO4 battery. It supports grid, solar, wind, and generator charging while providing expandable power and battery capacity for backup, off-grid, and energy storage applications.
Benefits
- Reduces reliance on high-rate grid electricity by storing energy for use during higher-cost periods.
- Provides dependable backup power for outages and off-grid applications.
- Supports long-term energy storage with a LiFePO4 battery rated for more than 6,000 cycles.
- Allows the system to grow with energy needs through expandable power, battery, and solar capacity.
- Provides flexible energy sourcing through solar, wind, AC, and external generator charging.
- Minimizes downtime with charging capability of up to 80% in approximately 2 hours under supported charging conditions.
- Supports easier deployment with a plug-and-play design suitable for permanent or temporary installations.
Features
- 10,000W continuous output provides high-capacity power for whole-home applications.
- 20,000W expandable continuous output allows two units to be combined for increased power capacity.
- 10,496Wh LiFePO4 battery provides integrated energy storage.
- 73.4kWh expandable battery capacity supports up to seven batteries.
- 12,000W solar charging supports high-capacity solar integration through dual MPPT solar charging.
- 350W wind charging provides an additional renewable charging option.
- AC coupling and Rapid Shutdown support allow compatible rooftop solar systems to continue operating during grid outages while supporting solar safety requirements.
- Flexible voltage charging supports 120V, 120/240V, and 120/208V charging configurations.
- Automatic switching under 20ms helps transition between power sources quickly.
- Pure sine wave output provides a clean AC power waveform.
- Integrated Battery Management System (BMS) monitors and manages battery status for system operation.
- LED display provides accessible system and battery status information.
- Multiple output and input ports support a range of power connections and charging sources.
- UL 1741 and UL 1973 certifications provide documented safety certifications for the inverter and battery.
Specifications
- Continuous Output Power: 10,000W
- Expandable Continuous Peak Power: 20,000W
- Output Peak Power: 20,000W
- Expandable Peak Power: 40,000W
- Output Voltage: 120V/240V split phase or 120V/208V 2 of 3 phases
- Output Frequency: 60Hz
- Output Power Form: Pure sine wave
- Auto Switching: <20ms
- Battery Capacity: 51.2V 205Ah (10,496Wh)
- Expandable Battery Capacity: 73.4kWh (7 batteries)
- Battery Chemistry: Lithium Iron Phosphate (LiFePO4)
- Battery Cycle Life: >6,000 cycles
- Self-Discharge: Recommended recharging every 6 months
- 120Vac Charger: 1,000W
- 208Vac or 240Vac Charger: 4,500W
- Wind Charger: 350W
- Solar Charger: 12,000W, 120Vdc–550Vdc
- Solar Charge Mode: 2 × MPPT
- Output Ports: 4 × NEMA 5-20R, 1 × NEMA TT-30R, 1 × NEMA L14-30R, 1 × NEMA 14-50R, 1 × Expansion Port
- Input Ports: 2 × Solar Input, 1 × Wind Input, 1 × 120Vac Input, 1 × 208Vac or 240Vac Input, 1 × Alternate 208Vac or 240Vac Input
- Optimal Operating Temperature: 68–86°F (20–30°C)
- Storage Temperature: 14–113°F (-10–45°C)
- Battery Charging Temperature: 32–113°F (0–45°C)
- Battery Discharging Temperature: 14–113°F (-10–45°C)
- Warranty: 5-Year Limited Warranty
- Inverter Certification: ANSI/CAN/UL 1741
- Battery Certification: ANSI/CAN/UL 1973
- Generator Dimensions: 21.8 x 8.5 x 38.5 in. (555.4 x 216 x 980 mm), excluding mounting bar
- Generator Weight: 152 lbs (69 kg)
- Battery Dimensions: 21.8 x 8.5 x 23.4 in. (555.4 x 216 x 596 mm), excluding mounting bar
- Battery Weight: 213 lbs (96.6 kg)
Documents
MyGrid 10k Specification Sheet
MyGrid 10K Generator and Battery User Manual
MyGrid 10K Inverter Certificate of Compliance ANSI/CAN/UL 1741
MyGrid 10K Battery cETLus Certificate ANSI/CAN/UL 1973
MyGrid 10K Solar Panel Connection Guide
- Regular price
- $5,999.99
Estimated shipping time
Estimated shipping time
You can typically expect your items to arrive within 4–7 business days, depending on your location and product availability.
What is your Return Policy?
What is your Return Policy?
At Direct Homestead Supply, we want every customer to shop with confidence. If something doesn’t go as planned, we’ve made returns and refunds simple and fair. Here’s how it works:
1. Return Window
You can request a return within 30 days of receiving your order. Unfortunately, we’re unable to accept returns after that time frame.
2. Who Pays for Return Shipping?
- If your item arrives damaged, defective, or incorrect, we’ll cover the return shipping cost.
- If you’re returning an item because you changed your mind, you’ll be responsible for return shipping fees.
3. Damaged or Defective Items
Received something broken or not working properly? Contact us within 30 days. We’ll provide a prepaid return label and once the item is returned and inspected, we’ll issue either a full refund or a replacement—including any original shipping costs.
4. Changed Your Mind?
If you no longer want the item, you can return it within 30 days—as long as it's unused, in its original packaging, and in resellable condition. You’ll need to handle the return shipping, and once we receive and inspect it, we’ll refund the product cost (excluding shipping).
5. Refund Processing
Once we receive and approve your return, we’ll send a confirmation email and issue a refund to your original payment method within 7 business days. Please allow additional time for banks or credit card companies to process and reflect the refund.
If it’s been over 10 business days since your refund was approved and you still don’t see it, contact us at support@directhomesteadsupply.com and we’ll look into it immediately.
6. Restocking Fees
In some cases, a restocking fee may apply depending on the item and return reason. If applicable, we’ll clearly communicate this during your return request process.
